SPARC Console Journal

M4000

#. switch to XSCF mode from console
XSCF > console -d 0   # switch to domain console


XSCF> showdomainstatus -d 0

XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :y
00 :Powering on

*Note*
 This command only issues the instruction to power-on.
 The result of the instruction can be checked by the "showlogs power".
XSCF> console -d 0

send break signal to domain
XSCF> sendbreak -y -d 0
Send break signal to DomainID 0?[y|n] :y


in domain console, after system up and login as root issue below command to enter ok prompt

init 0

# Mar  8 09:22:42  ip: ip_create_dl: hw addr length = 0
svc.startd: The system is coming down.  Please wait.
svc.startd: 112 system services are now being stopped.
Mar  8 09:22:44  scsi: WARNING: /pci@3,700000/SUNW,qlc@0/fp@0,0/ssd@w20570080e53683c6,1f (ssd0):
Mar  8 09:22:44         Corrupt label; wrong magic number
Mar  8 09:22:48  rpc.metad: Terminated
Mar  8 09:22:49  ip: ip_create_dl: hw addr length = 0
Mar  8 09:22:53  syslogd: going down on signal 15
svc.startd: The system is down.
syncing file systems... done
Program terminated
{6} ok boot cdrom
Resetting...

 {d} ok show-disks
a) /ramdisk-root
b) /pci@3,700000/SUNW,qlc@0/fp@0,0/disk
c) /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk
d) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: c
/pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
         for creating devalias mydev for /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk
{d} ok nvalias mydev /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk
{d} okshow-devs
{d} ok boot mydev - install
Resetting...